Pop-lock PL8350 Manuel d'utilisateur télécharger pdf

Parts Included DODGE RAM 1500 2009 & Up

Power Lock Relay Wiring Cable New Body Style

Short Wiring Cable Blue Connector Taps DODGE RAM 2500/3500 2009/10 & Up

Long Wiring Cable Cable Ties New Body Style

Tools Required

#10 Torx Driver

10 MM socket

Ratchet

Ratchet Extension

Pliers

1. Open the tailgate and if applicable, remove the tailgate bed-liner.

2. Using a #10 Torx driver, remove the 8 screws holding the access panel.

3. Remove the access panel and set aside.

4. Remove the two 8mm nuts form the inside of the tailgate holding the handle assembly. The latch rods

do not have to be removed from the handle assembly.

5. Slide the PL8350 POWER LOCK through one of the access openings on the passenger’s side of the

tailgate and slip the bracket over the two studs of the handle assembly.

6. Make sure that the Slide Bolt opening is centered over the OEM plastic locking arm. See Diagram 2

for details.

7. Replace the two 8mm nuts over the studs and tighten while ensuring proper function of the POWER

LOCK by manually moving the Slide Bolt up and down.

8. Using the OEM ignition key, lock and unlock the manual lock to ensure that the POWER LOCK is not

interfering with the manual locking mechanism.

9. Tape the connector end of the short wiring harness to a coat hanger or electrical fish tape. Slip it

through the top access hole down to the bottom of the tailgate and through the drain hole.

10. Connect the short wiring harness to the POWER LOCK. Wherever possible, use cable ties to fasten

the harness preventing it from moving.

11. Connect the other end of the short wiring harness to the Long wiring harness and locate the connector

so that it is accessible for tailgate removal. Make sure that the tailgate cannot pinch the harness when

opened or closed.

12. Run the long wiring harness underneath the truck driver’s side, following the

OEM body harness to the firewall, into the fender well and to the engine

compartment. Make sure to use enough cable ties to prevent the wiring

For Tech Support call: 1-800-342-5911 1 of 2

PL8350

Mounting Bracket

Actuator

Slide Bolt

Mounting Holes

Diagram 1 - Power Lock Details

For the latest instructions please

visit www.popandlock.net

12-27-11

1 2 3

Résumé du contenu

Page 1 - Tools Required

Parts Included DODGE RAM 1500 2009 & UpPower Lock Relay Wiring Cable New Body StyleShort Wiring Cable Blue

Page 2 - Diagram 2 - Assembled View

harness from moving.13. Mount the Relay kit on a suitable location near the battery.14. Attach the long wiring harness to the relay harness by attachi

Page 3

LIMITED WARRANTY TERMS AND CONDITIONS (1) Installation. Pop & Lock™, LLC (and Pop & Lock™ Corporation) is not responsible for installing

Plus de documents pour Pour la voiture Pop-lock PL8350

Voir le document Pop-lock PL8350 Manuel d'utilisateur

Pop-lock PL8350 Manuel d'utilisateur (3 pages)

Commentaires sur ces manuels

Pas de commentaire

Pop-lock PL8350 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Pop-lock PL8350. Pop & Lock PL8350 User Manual Manuel d'utilisatio

Résumé du contenu

Plus de documents pour Pour la voiture Pop-lock PL8350

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Pop-lock PL8350